– Fixed: Cloned Hard Drive or SSD Won’t Boot
Cloned hard drive wont boot? Here are the normal fix to get your computer bootable again. Also, if the fix does not help, you are able to get 2 more alternative programs of MiniTool that can guide you through a successful disk cloning process and the cloned hard drive is bootable. There are times that you may need to clone a hard drive.
For instance, you want to upgrade HDD to SSD for better performance; you need to clone hard drive to a larger one to save more files; you have got multiple computers with the same configurations to install, you just want to make a disk backup, etc.
However, when browsing the internet, we found that many users are troubled by one thing: cloned hard drive won’t boot. Here is a live example from Tomsguide :. When the cloned drive will not boot, you need to do the following checks in general. Please go through all of them first and then try the one that fits your situation best.
There is a high possibility that you have a system reserved partition or EFI system partition located on your system disk. When the cloned drive won’t boot Windows 10, please make sure you did clone the intact system instead of partition only. Try them out and see if they are helpful. However, if all in vain and the cloned drive won’t boot still, you might need to ask for help from another reliable software. Just keep reading. As many users reported that their cloned drive won’t boot despite that they used hard drive cloning software.
For these considerations, we suggest using MiniTool software to have a try. Generally speaking, it is a professional disk cloning software that is frequently used to clone hard drive for hard drive upgrade and disk backup. When you have used it to clone a live system disk, the target disk is bootable. Free Download. If so, get them backed up or transfer them to a safe location. Step 1. Run MiniTool Partition Wizard to get the main interface.
Then select the current system disk and choose Copy Disk from the left action panel. Step 2. In the pop-up window, you will be asked to choose a target disk. Here select the hard drive you have just prepared and click Next to go on. Note that all data if there is any on this disk will be destroyed.
Once you have made the backup in advance, you can click Yes to continue. Step 3. Then review the changes to be made on the target disk. Or, if you are not satisfied with the partition layout, make your own changes. Step 4. View the tip on how to boot from the target disk and click Finish. Step 5. In the disk map area, you can preview the changes that will take effect on the target disk.
Finally, don’t forget to press Apply on the toolbar. This operation will bring a system reboot. Please save your files and close all the running programs. Then go to BIOS setup and boot your computer from the target drive.
Your computer should be normally booted now. Share this useful software with more friends. Dissimilar hardware is the main reason that is responsible for cloned drive will not boot. In such case, the best choice here is to use MiniTool ShadowMaker. Some of you might have already known that MiniTool ShadowMaker is professional Windows backup software that is most frequently used to create scheduled system backup, disk backup, and file backup.
In fact, MiniTool ShadowMaker also works well when it comes to cloning system disk and makes it bootable on computers with dissimilar hardware.
However, you do have the chance to complete this task by using the day free trial edition. Run this Windows disk cloning software. When you are asked to choose a computer to manage, you just need to select This Computer to connect.
Next, you need to enter the Source tab to choose the system disk and then enter the Destination tab to select the target disk. When you click OK to continue, you will be prompted that data on the target disk will be destroyed. Click Yes to continue. The copy process begins. You will be able to see the elapsed time, remaining time as well as the progress bar.
Once the disk copy completes, you will see the following long information. Simply put, now your source disk and target disk have the same signature. Windows will mark one as offline to avoid booting from the wrong disk. But since you are going to use the targeted disk to another computer, you just need to shut down PC and then remove the target disk. Now it is time to create a bootable media to get the rest steps. Here are the tutorials that will lead you through all the steps easily.
Also, follow the universal guidance above to create a bootable media of MiniTool ShadowMaker, put the target disk to the computer that has dissimilar hardware and use MiniTool ShadowMaker Bootable to boot that PC. Also, go to Tools but choose Universal Restore this time.
Then this tool will automatically detect the operating system installed on the disk. At this time you can click the Restore button directly or you can add some drivers to the system before you click Restore. When you see a green mark appear on the operating system, you can exit MiniTool Universal Restore. You get a bootable operating system! With this disk cloning software, you don’t need to worry about the cloned drive won’t boot issue. Don’t want to have a try? Reading here, we believe you have learned the way to fix cloned drive won’t boot issue as well as learned the best disk cloning software that helps clone hard drive easily.
Now it is your turn to try these solutions out if your cloned drive won’t boot. If you have come across some other suggestions, welcome to leave it in the comment zone. For any questions towards using MiniTool software, don’t hesitate to contact us by sending an email to [email protected] with your issue stated clearly. Download Partition Wizard. Summary : Cloned hard drive wont boot? If you also encounter such an error, you can turn to MiniTool Partition Wizard Pro Edition which enables you to create a bootable media to do the cloning instead.
Windows 10 will not boot after clone free download
When you have used it to clone a live system disk, the target disk is bootable. Free Download. If so, get them backed up or transfer them to a safe location. Step 1. Run MiniTool Partition Wizard to get the main interface.
Then select the current system disk and choose Copy Disk from the left action panel. Step 2. In the pop-up window, you will be asked to choose a target disk. Here select the hard drive you have just prepared and click Next to go on.
Note that all data if there is any on this disk will be destroyed. Once you have made the backup in advance, you can click Yes to continue.
Step 3. Then review the changes to be made on the target disk. Or, if you are not satisfied with the partition layout, make your own changes. Step 4. View the tip on how to boot from the target disk and click Finish. Step 5. In the disk map area, you can preview the changes that will take effect on the target disk. Finally, don’t forget to press Apply on the toolbar. This operation will bring a system reboot. Can anyone help me, or is there any trusted free cloning software?
It may show you this message:. Windows fails to Start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your Windows installation disc and restart your computer. If you do not have this disc, contact your system administrator or computer manufacturer for assistance. The following methods are bound to resolve SSD not working after cloning for particular reasons. Follow the step-by-step guides to make the cloned SSD boot normally.
The disk clone software does not guarantee that the external disk can boot smoothly when using a USB cable. It is best to connect devices to a computer via SATA. Step 2. If the SSD boots up, congratulations. Your problem gets resolved. If not, continue with Method 2. Here are the steps:. Step 1. Restart the PC. Next, use the arrow key to choose the Boot tap and select the cloned SSD as the first boot option.
And you can fix this issue in the next Method. The system partition should be set as the active partition. You can set the system partition as an active partition with an easy-to-use partition manager in the WinPE environment. Here is how to do it:. Create a bootable disk and boot PC from it. Connect the SSD to your computer properly. If not, disconnect it and then carefully reconnect it to your computer. They are compatible with different boot mode.
So you need to change the boot mode according to the partition style. Feel free to ask any questions. Based on the results you post back I may have other suggestions if necessary. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP Potentially Unwanted Products.
Thoroughly research any product advertised on the sites before you decide to download and install it. Details required : characters remaining Cancel Submit. Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. Below is Macrium Reflect Free Screenshot of desktop computer. Disk 2, C: drive, is currently used still booting Win10 Pro drive. Guidance to Fix problem is appreciated. It looks correct. What is telling you the Boot manager is missing? Can I see the error box?
I’ve never heard of that in hundreds of Macrium cases. If it won’t start boot into Macrium media to run Boot corrector following the tutorial I gave. Is UEFI disabled? My problem is there are no Error Messages. My C: drive boots still boots with no problems.
Windows 10 will not boot after clone free download
It depends on your requirements and preference. So you need to change the boot mode according to the partition style. Next, you need to enter the Source tab to choose the system disk and then enter the Destination tab to select the target disk. I explained that the Boot Corrector on their rescue media flash stick you can make off the app will fix any disk problems. Note: I had previously believed that each drive should have its own BCD. Can you boot into Macrium and take a picture of the drive map showing all partitions listings to post back? Lastly, select “Open.